chromeos/services/secure_channel/public/mojom/secure_channel.mojom

// Copyright 2018 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

module chromeos.secure_channel.mojom;

import "chromeos/components/multidevice/mojom/multidevice_types.mojom";

enum ConnectionAttemptFailureReason {
  // The local device could not authenticate with the remote device. This likely
  // means that one (or both) devices have not synced their keys recently.
  AUTHENTICATION_ERROR,

  // An advertisement could not be generated for this connection. This likely
  // means that one (or both) devices have not synced ntheir BeaconSeeds
  // recently.
  COULD_NOT_GENERATE_ADVERTISEMENT,

  // GATT connections were attempted, but they failed. This could be caused by
  // errors creating GATT connections, dropped GATT connections, or an issue
  // relating to GATT services being unavailable.
  GATT_CONNECTION_ERROR,

  // The provided local device does not have a public key set.
  LOCAL_DEVICE_INVALID_PUBLIC_KEY,

  // The provided local device does not have a persistent symmetric key set.
  LOCAL_DEVICE_INVALID_PSK,

  // The provided remote device does not have a public key set.
  REMOTE_DEVICE_INVALID_PUBLIC_KEY,

  // The provided remote device does not have a persistent symmetric key set.
  REMOTE_DEVICE_INVALID_PSK,

  // Timeouts occurred trying to contact the remote device.
  TIMEOUT_FINDING_DEVICE,

  // The local Bluetooth adapter is disabled (turned off).
  ADAPTER_DISABLED,

  // The local Bluetooth adapter is not present.
  ADAPTER_NOT_PRESENT
};

enum ConnectionCreationDetail {
  REMOTE_DEVICE_USED_BACKGROUND_BLE_ADVERTISING,
  REMOTE_DEVICE_USED_FOREGROUND_BLE_ADVERTISING
};

// Determines the order in which connections are attempted when system resources
// must be shared. For example, a device can only register a limited number of
// BLE advertisements at a given time due to hardware constraints; in this
// situation, a connection attempt with a higher priority will be allowed to
// register an advertisement before an attempt with a lower priority.
//
// For connection mediums which do not require use of limited system resources,
// ConnectionPriority is ignored.
enum ConnectionPriority {
  // Should be used for connection attempts which do not have latency
  // requirements (e.g., background scans for nearby devices).
  LOW,

  // Should be used when the connection attempt should complete in a reasonable
  // amount of time but is not urgent (e.g., heartbeat/keep-alive messages).
  MEDIUM,

  // Should be used when the user is directly waiting on the result of the
  // connection (e.g., the user clicks a button and sees a spinner in the UI
  // until the connection succeeds).
  HIGH
};

struct BluetoothConnectionMetadata {
  // RSSI at the exact time that this metadata was requested. Note that RSSI
  // may change drastically in a short period; this is only a snapshot.
  int32 current_rssi;
};

struct ConnectionMetadata {
  // Details which describe how the connection was created. If no
  // ConnectionCreationDetails apply to this connection, the array is empty.
  array<ConnectionCreationDetail> creation_details;

  // Only available for connections over Bluetooth.
  BluetoothConnectionMetadata? bluetooth_connection_metadata;

  // The responder auth message returned by the other device during the
  // cryptographic handshake that established the channel. These are serialized
  // bytes of a proto which contains an encrypted message, returned by the
  // remote device in the last step of a 3-step cryptographic handshake. These
  // bytes were publicly visible over BLE when the connection with the remote
  // device was being established. It is used by some clients for further
  // cryptographic communication.
  // Defined by //chromeos/services/device_sync/proto/securemessage.proto.
  string channel_binding_data;
};

interface Channel {
  // If the connection is dropped (e.g., by the remote device or due to
  // connection instability), this reason is supplied to the
  // connection_error_with_reason_handler.
  const int32 kConnectionDroppedReason = 1;

  // Sends an encrypted message over the connection. The message is sent
  // along with metadata indicating the feature used to create this
  // connection. The callback is invoked when the message has been sent
  // successfully. If the message fails to be sent, the entire Channel is
  // disconnected with reason |kConnectionDroppedReason|, and the SendMessage()
  // callback is never invoked.
  SendMessage(string message) => ();

  GetConnectionMetadata() => (ConnectionMetadata metadata);
};

interface MessageReceiver {
  // Invoked when a message is received over the connection. Only messages
  // corresponding to the feature used when creating the connection are
  // passed to this callback.
  OnMessageReceived(string message);
};

// Delegate interface used to handle connection attempt successes/failures. Note
// that this interface is intended to be implemented by clients of the
// DeviceSync service.
interface ConnectionDelegate {
  // Invoked when a connection attempt failed (i.e., the failure occurred before
  // a connection could be established).
  OnConnectionAttemptFailure(ConnectionAttemptFailureReason reason);

  // Invoked when a connection is established. The channel is authenticated
  // with account credentials, and all messages sent over the channel are
  // encrypted. Client should set a connection_error_with_reason_handler on
  // |channel| to be notified when it has been invalidated due to a dropped
  // connection. Note that clients are expected to hold the reference to
  // |channel| until they are done using the connection.
  OnConnection(Channel channel, MessageReceiver& message_receiver);
};

// Brokers connections between the current Chromebook and remote devices,
// allowing the sending/receiving of messages. All channels created via this API
// are authenticated and all messages sent are encrypted via account-specific
// keys.
//
// If multiple connections are requested to the same device, this service
// creates only one connection and shares it among all clients; likewise, if
// multiple clients are sharing a single connection and one client drops its
// reference to the connection, the connection will stay active until each
// client has invalidated its reference to the channel.
//
// All connections require metadata about the local device (i.e., the device on
// which this code is running) in order to perform a cryptographic handshake
// which ensures that both devices are owned by the same underlying account.
// Note that each logged-in user on Chrome OS has its own set of keys; thus, the
// provided local device is not the same each time the call is made. For
// instance, at the sign-in (i.e., account-choosing) screen, EasyUnlock tries to
// establish connections to phones belonging to each account on the device, so
// each of these connection attempts uses a different local device.
//
// Note: Each API function results in either one connection (success case)
// or zero connections (failure case). Clients wishing to initiate another
// connection after the first one has completed should invoke the API again.
interface SecureChannel {
  // Starts listening for an incoming connection attempt from |device|.
  // This function listens indefinitely until a connection is formed, at
  // which time |delegate|'s OnConnection() is invoked. |delegate|'s
  // OnConnectionFailure() is only invoked if the connection could not be
  // attempted at all (e.g., if |device| did not contain valid metadata). To
  // cancel a connection attempt (i.e., to stop listening for incoming
  // connections), disconnect |delegate|.
  ListenForConnectionFromDevice(
      chromeos.multidevice.mojom.RemoteDevice device_to_connect,
      chromeos.multidevice.mojom.RemoteDevice local_device,
      string feature,
      ConnectionPriority connection_priority,
      ConnectionDelegate delegate);

  // Initiates a connection to |device|, which is presumed to be listening
  // for incoming connections. This function attempts to create a connection
  // until it has succeeded or until it has failed several attempts.
  // |delegate|'s OnConnection() is called in the success case, and
  // OnConnectionFailure() is called if a connection could not be attempted or
  // if a connection was attempted and failed several retry attempts. To cancel
  // the connection attempt, disconnect |delegate|.
  InitiateConnectionToDevice(
      chromeos.multidevice.mojom.RemoteDevice device_to_connect,
      chromeos.multidevice.mojom.RemoteDevice local_device,
      string feature,
      ConnectionPriority connection_priority,
      ConnectionDelegate delegate);
};